AGM5AD4A|GM5 Expansion Analog I/O Unit
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | AGM5AD4A |
|---|---|
| Part Number | AGM5AD4A |
| Product | Analog Input Unit |
| Product Name | GM5 Expansion Analog I/O Unit |
Contact Us
*Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
Specifications and design of the products are subject to change without notice for the product improvement.
| Item | Specifications |
|---|---|
| Part Number | AGM5AD4A |
| Product Number | AGM5AD4A |
| Product Name | Analog Input Unit |
General specifications
| Item | Specifications |
|---|---|
| Withstand voltage | 500 V AC for one minute (Leakage current: 5 mA) |
| Insulation resistance | 100 MΩ or more (Test voltage 500 V DC) |
| Vibration resistance | 5 to 8.4 Hz, half amplitude 3.5 mm, 8.4 to 150 Hz acceleration 9.8 m/s2 10 sweeps each in X, Y and Z directions (1 octave/min) |
| Shock resistance | 147 m/s2, 3 times each in the X, Y, Z directions |
| Noise immunity | 1000 V [p-p] with pulse widths of 1 μs and 50 ns (using a noise simulator) (Power supply terminal) |
| Operating temperature | 0 to +55℃ |
| Storage temperature | -40 to +70℃ |
| Operating humidity | 10 to 95% RH (at +25℃, no condensation or icing) |
| Storage humidity | 10 to 95% RH (at +25℃, no condensation or icing) |
| Pollution level | Pollution degree 2 or less |
| Operating environment | Free of corrosive gases No excessive dust |
| Altitude | 2,000 m above sea level or lower |
| Overvoltage class | Category II |
| Installation place | Inside a control panel that provides a protection rating of IP54 or higher. (metal panel with sufficient strength) |
| Weight | Approx. 120 g (including the terminal block) |
| Consumption current | At 20.4 V DC: 130 mA or less At 24.0 V DC: 110 mA or less *This represents the increase in controller current consumption. |
Input specifications
| Item | Specifications |
|---|---|
| Number of channels | 4 channels |
| Input range | Voltage: -10 to 10 V DC (Resolution: 1/64,000) 0 to 10 V DC (Resolution: 1/32,000) -5 to 5 V DC (Resolution: 1/64,000) 0 to 5 V DC (Resolution: 1/32,000) 1 to 5 V DC (Resolution: 1/25,600) Current: 0 to 20 mA (Resolution: 1/32,000) 4 to 20 mA (Resolution: 1/25,600) |
| Outside input range | ±2% of input range |
| Hardware conversion speed | 40 μs per 4 channels |
| Total accuracy | ±0.2% F.S. max. (at 25°C) and ±0.4% F.S. max. (at 0°C to +55°C) |
| Input impedance | Voltage: Approx. 1 MΩ Current: Approx. 250 Ω |
| Absolute max. input | Voltage: -15 to 15 V (voltage input) Current: -30 mA to 30 mA (current input) |
| Insulation method | Between input terminal and internal circuit: Electrical insulation by isolated DC/DC converter Between channels: Non-isolated |
| External connection method | Pluggable crimp terminal block |
| Converted / non-converted channel settings | Possible to make non-converted channel settings |
| Input range switching | Possible to make settings on a channel-by-channel basis |
| Average processing | Number of averaging times) Range setting: 2 to 120,000 times Time average) Range setting: 10 to 1500 ms Moving average) Range setting: 2 to 120,000 times |
| Bias setting | Setting range: -3000 to 3000 |
| Gain setting | Setting range: 9000 to 11000 (90% to 110%) |
| Scale conversion settings | Setting range: -32768 to 32767 |
| Upper / lower limit comparison | Outputs if the preset upper limit or lower limit is exceeded Setting range: -32768 to 32767 |
| Max. / Min. value retention | Retains the acquired maximum and minimum values |
| Disconnection detection | Available only for the following modes; possible to select auto or manual resetting 1-5 V mode (detection voltage 0.7 V or less) 4–20 mA (detection current 2.8 mA or less) |
| Indicators | Power indicator (blue) Link indicator (green) Error indicator (red) |
| Power supply input | Backplane power supplied from the CPU unit |
