AGM5DA4A|GM5 Expansion Analog I/O Unit
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | AGM5DA4A |
|---|---|
| Part Number | AGM5DA4A |
| Product | Analog Output Unit |
| Product Name | GM5 Expansion Analog I/O Unit |
Contact Us
*Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
Specifications and design of the products are subject to change without notice for the product improvement.
| Item | Specifications |
|---|---|
| Part Number | AGM5DA4A |
| Product Number | AGM5DA4A |
| Product Name | Analog Output Unit |
General specifications
| Item | Specifications |
|---|---|
| Withstand voltage | 500 V AC for one minute (Leakage current: 5 mA) |
| Insulation resistance | 100 MΩ or more (Test voltage 500 V DC) |
| Vibration resistance | 5 to 8.4 Hz, half amplitude 3.5 mm, 8.4 to 150 Hz acceleration 9.8 m/s2 10 sweeps each in X, Y and Z directions (1 octave/min) |
| Shock resistance | 147 m/s2, 3 times each in the X, Y, Z directions |
| Noise immunity | 1000 V [p-p] with pulse widths of 1 μs and 50 ns (using a noise simulator) (Power supply terminal) |
| Operating temperature | 0 to +55℃ |
| Storage temperature | -40 to +70℃ |
| Operating humidity | 10 to 95% RH (at +25℃, no condensation or icing) |
| Storage humidity | 10 to 95% RH (at +25℃, no condensation or icing) |
| Pollution level | Pollution degree 2 or less |
| Operating environment | Free of corrosive gases No excessive dust |
| Altitude | 2,000 m above sea level or lower |
| Overvoltage class | Category II |
| Installation place | Inside a control panel that provides a protection rating of IP54 or higher. (metal panel with sufficient strength) |
| Weight | Approx. 120 g (including the terminal block) |
| Consumption current | At 20.4 V DC: 255 mA or less At 24.0 V DC: 220 mA or less *This represents the increase in controller current consumption. |
Output specifications
| Item | Specifications |
|---|---|
| Number of channels | 4 channels |
| Output range | Voltage: -10 to 10 V DC (Resolution: 1/64,000) 0 to 10 V DC (Resolution: 1/32,000) -5 to 5 V DC (Resolution: 1/64,000) 0 to 5 V DC (Resolution: 1/32,000) 1 to 5 V DC (Resolution: 1/25,600) Current: 0 to 20 mA (Resolution: 1/32,000) 4 to 20 mA (Resolution: 1/25,600) |
| Outside output range | ±2% of output range |
| Hardware conversion speed | 390 μs per channel |
| Total accuracy | ±0.2% F.S. max. (at 25°C) and ±0.4% F.S. max. (at 0°C to +55°C) |
| Output impedance | Voltage output: 0.5 Ω or less |
| Max. output current | Voltage output: 10 mA |
| Allowable load resistance range | Current output: 500 Ω or less |
| Insulation method | Between input terminal and internal circuit: Electrical insulation by isolated DC/DC converter Between channels: Non-isolated |
| External connection method | Pluggable crimp terminal block |
| Converted / non-converted channel settings | Possible to make non-converted channel settings |
| Output range switching | Possible to make settings on a channel-by-channel basis |
| Bias setting | Setting range: -3000 to 3000 |
| Gain setting | Setting range: 9000 to 11000 (90% to 110%) |
| Scale conversion settings | Setting range -32768 to 32767 |
| Upper and lower output limits | Output limitation when exceeded Setting range: -32640 to 32640 |
| Analog output hold | When in STOP state Setting range: -32640 to 32640 |
| Indicators | Power indicator (blue) Link indicator (green) Error indicator (red) |
| Power supply input | Backplane power supplied from the CPU unit |
