AGM5TC4A|GM5 Expansion Thermocouple Unit
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | AGM5TC4A |
|---|---|
| Part Number | AGM5TC4A |
| Product | Thermocouple Input Unit |
| Product Name | GM5 Expansion Thermocouple Unit |
Contact Us
*Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
Specifications and design of the products are subject to change without notice for the product improvement.
| Item | Specifications |
|---|---|
| Part Number | AGM5TC4A |
| Product Number | AGM5TC4A |
| Product Name | Thermocouple Input Unit |
| Number of input points | 4 points |
| Input range and accuracy | K-type: -200.0 to 1372.0°C (±0.1% F.S. max.) J-type: -200.0 to 1200.0°C (±0.1% F.S. max.) T-type: -200.0 to -100.0°C (±0.2% F.S. max.) -100.0 to 400.0°C (±0.1% F.S. max.) R-type: 0.0 to 100.0°C (±0.2% F.S. max.) 100.0 to 1700.0°C (±0.1% F.S. max.) |
| Resolution | 0.1°C |
| Loop sampling cycle setting range (Conversion speed, in Hz) | 20, 45, 90, 175, 330, 600, 1000 |
| Insulation method | Between input terminal and internal circuit: Electrical insulation by isolated DC/DC converter |
| Disconnection detection | Yes |
| Compensation | Cold junction compensation |
| Connection method | Pluggable crimp terminal block |
| Filter settings | Yes |
| Over-range diagnosis | Yes |
| Indicators | Power indicator (blue) Link indicator (green) Error indicator (red) |
| Power supply input | Backplane power supplied from the CPU unit |
General specifications
| Item | Specifications |
|---|---|
| Withstand voltage | 500 V AC for one minute (Leakage current: 5 mA) |
| Insulation resistance | 100 MΩ or more (Test voltage 500 V DC) |
| Vibration resistance | 5 to 8.4 Hz, half amplitude 3.5 mm, 8.4 to 150 Hz acceleration 9.8 m/s2 10 sweeps each in X, Y and Z directions (1 octave/min) |
| Shock resistance | 147 m/s2, 3 times each in the X, Y, Z directions |
| Noise immunity | 1000 V [p-p] with pulse widths of 1 μs and 50 ns (using a noise simulator) (Power supply terminal) |
| Operating temperature | 0 to +55℃ |
| Storage temperature | -40 to +70℃ |
| Operating humidity | 10 to 95% RH (at +25℃, no condensation or icing) |
| Storage humidity | 10 to 95% RH (at +25℃, no condensation or icing) |
| Pollution level | Pollution degree 2 or less |
| Operating environment | Free of corrosive gases No excessive dust |
| Altitude | 2,000 m above sea level or lower |
| Overvoltage class | Category II |
| Installation place | Inside a control panel that provides a protection rating of IP54 or higher. (metal panel with sufficient strength) |
| Weight | Approx. 110 g (including the terminal block) |
| Consumption current | At 20.4 V DC: 105 mA or less At 24.0 V DC: 85 mA or less *This represents the increase in controller current consumption |
