AGM5X32D2A|GM5 Expansion Digital I/O Unit
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | AGM5X32D2A |
|---|---|
| Part Number | AGM5X32D2A |
| Product | Digital Input Unit |
| Product Name | GM5 Expansion Digital I/O Unit |
Contact Us
*Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
Specifications and design of the products are subject to change without notice for the product improvement.
| Item | Specifications |
|---|---|
| Part Number | AGM5X32D2A |
| Product Number | AGM5X32D2A |
| Product Name | Digital Input Unit |
General specifications
| Item | Specifications |
|---|---|
| Rated voltage | 24 V DC |
| Operating voltage range | 20.4 to 28.8 V DC |
| Allowable momentary power failure time | 24 V DC 10 ms or less (at Product shipment) |
| Withstand voltage | 500 V AC for one minute (Leakage current: 5 mA) |
| Insulation resistance | 100 MΩ or more (Test voltage 500 V DC) |
| Vibration resistance | 5 to 8.4 Hz, half amplitude 3.5 mm, 8.4 to 150 Hz acceleration 9.8 m/s2 10 sweeps each in X, Y and Z directions (1 octave/min) |
| Shock resistance | 147 m/s2, 3 times each in the X, Y, Z directions |
| Noise immunity | 1000 V [p-p] with pulse widths of 1 μs and 50 ns (using a noise simulator) (Power supply terminal) |
| Operating temperature | 0 to +55℃ |
| Storage temperature | -40 to +70℃ |
| Operating humidity | 10 to 95% RH (at +25℃, no condensation or icing) |
| Storage humidity | 10 to 95% RH (at +25℃, no condensation or icing) |
| Pollution level | Pollution degree 2 or less |
| Operating environment | Free of corrosive gases No excessive dust |
| Altitude | 2,000 m above sea level or lower |
| Overvoltage class | Category II |
| Installation place | Inside a control panel that provides a protection rating of IP54 or higher. (metal panel with sufficient strength) |
| Weight | Approx. 110 g |
| Consumption current | At 20.4 V DC: 75 mA or less At 24.0 V DC: 70 mA or less *This represents the increase in controller current consumption |
Input specifications
| Item | Specifications |
|---|---|
| Insulation method | Optical coupler |
| Rated input voltage | 24 V DC |
| Rated input current | Approx. 3.8 mA (at 24 V DC) |
| Input impedance | Approx. 4.7 kΩ |
| Operating voltage range | 21.6 V DC to 26.4 V DC |
| Min. ON voltage/ON current | 19.2 V DC / 3 mA |
| Max. OFF voltage/OFF current | 7.2 V DC / 0.2 mA |
| Response time : OFF→ON | 0.1 ms max. (Possible to change by using the input filter function) |
| Response time : ON→OFF | 0.1 ms max. (Possible to change by using the input time constant selection function) |
| Input points per common | 32 points/common |
| Operating mode indicator | 32-point LED display (Lit when ON) |
| External connection method | Connector connection (Compliant with the MIL standard, 40P, one piece used) |
