{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

RX-PRVM3｜Robust Photoelectric Sensor RX(Discontinued)

Download

Discontinued

Discontinued

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    RX-PRVM3

    Product Number

    RX-PRVM3

    Product

    Robust Photoelectric Sensor

    Details

    Standard type Retroreflective [Red(with polarizing filters)]

    Product Name

    		 Robust Photoelectric Sensor RX(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberRX-PRVM3
    Product NumberRX-PRVM3
    Products NameRobust Photoelectric Sensor
    Product detailsStandard type Retroreflective [Red(with polarizing filters)]
    Applicable regulationsEMC Directive, RoHS Directive
    Sensing range0.1 to 3 m 0.328 to 9.843 ft
    (Note) The sensing range and the sensing object for the retroreflective type sensor are specified for the RF-230 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away.
    Sensing objectdia. 50 mm dia. 1.969 in or more opaque, translucent or specular object
    (Note) The sensing range and the sensing object for the retroreflective type sensor are specified for the RF-230 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away.
    (Note) Make sure to confirm detection with an actual sensor before use.
    Hysteresis-
    Repeatability(perpendicular to sensing axis)1 mm 0.039 in or less
    Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
    Current consumption40 mA or less
    Sensing outputNPN open-collector transistor
    - Maximum sink current: 100 mA
    - Applied voltage: 30 V DC or less (between sensing output and 0 V)
    - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
    Sensing output:Utilization categoryDC-12 or DC-13
    Sensing output:Output operationSwitchable either Light-ON or Dark-ON
    Sensing output:Short-circuit protectionIncorporated
    Self-diagnosis outputNPN open-collector transistor
    - Maximum sink current: 50 mA
    - Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V)
    - Residual voltage: 1.5 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
    Self-diagnosis output:Output operationON under unstable sensing condition
    Self-diagnosis output:Short-circuit protection-
    Response time1 ms or less
    Test input (emission halt) functionIncorporated
    Operation indicatorRed LED (lights up when the sensing output is ON)
    Stability indicatorGreen LED (lights up under stable light received condition or stable dark condition)
    Emitting indicator-
    Sensitivity adjusterContinuously variable adjuster
    Automatic Interference prevention functionIncorporated (Two units of sensors can be mounted close together.)
    ProtectionIP67 (IEC)
    Ambient temperature-25 to +60 degrees -13 to +140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
    Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Ambient illuminanceIncandescent light: 3,500 Lx or less at the light-receiving face
    Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
    Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
    Vibration resistance10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
    Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
    Emitting element (modulated)Red LED
    Emitting element (modulated):Peak emission wavelength680 nm 0.027 mil
    MaterialEnclosure: Die-cast zinc alloy
    Indicator cover: Polyethersulphone
    Lens: Acrylic
    Cable0.15 mm2 5-core oil, heat and cold resistant cabtyre cable, 2 m 6.562 ft long
    Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable
    Weight75 g approx.
    AccessoryMS-RX-1 (Sensor mounting bracket): 1 set
    RF-230 (Reflector): 1 pc
    Adjusting screwdriver: 1 pc

    MENU

    Recently checked products

    Recently checked product numbers