Discontinued Products
*Photo may vary from actual product.
Download
Discontinued Products
Specifications
Dimensions
Ⅾiscontinued
Last time buy (JST)
September 30, 2009
*Photo may vary from actual product.
| Type | Cable type / slim | |
|---|---|---|
| Model No. | SS-A5 | |
| Applicable sensor heads | SH-2□, SH-3□, SH-72 | |
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |
| Current consumption | 40 mA or less | |
| Sensing output | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) | |
| Output operation | Selectable either Light-ON or Dark-ON with the operation mode switch | |
| Short-circuit protection | Incorporated | |
| Self-diagnosis output | NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) ・Residual voltage: 1 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) | |
| Output operation | ON under stable sensing condition | |
| Short-circuit protection | - | |
| Response time | 1 ms or less | |
| Operation indicator | Red LED (lights up when the sensing output is ON) | |
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) | |
| Sensitivity adjuster | Continuously variable twin adjusters | |
| Automatic interference prevention function | Incorporated (Two units of sensors can be mounted close together.) | |
| Timer function | Approx. 40 ms fixed OFF-delay timer, selectable either effective or ineffective | |
| Ambient temperature | -25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ | |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |
| Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | |
| Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each | |
| Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions for three times each | |
| Material | Enclosure: Heat-resistant ABS, Cover: Polyethersulfone | |
| Cable | 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long | |
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | |
| Weight | Net weight: 120 g approx. | |
| Accessories | MS-DIN-1 (Amplifier mounting bracket): 1pc., Adjusting screwdriver: 1 pc., Adjuster cap: 1 pc. | |
Note :Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
Amplifier
Assembly dimensions with attached amplifier mounting bracket

Amplifier mounting bracket (Accessory for Amplifier)

Material:Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Amplifier mounting bracket (Optional)

Material:Cold rolled carbon steel (SPCC) (Uni-chrome plated)Two M3 (length 20 mm0.787 in) screws with washers are attached.
MENU
Technical Inquiries, Purchase Support & Additional Assistance
Contact UsTechnical Inquiries, Purchase Support & Additional Assistance
Contact UsTechnical Inquiries, Purchase Support & Additional Assistance
Contact UsTechnical Inquiries, Purchase Support & Additional Assistance
Contact Us