{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

BSF4-AH80｜Flameproof Type Safety Light Curtain Type 4 BSF4-AH80 (Discontinued)

Download

To Be Discontinued

Discontinued

Please note that the end date may be earlier due to various circumstances.

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    BSF4-AH80

    Product Number

    BSF4-AH80

    Product

    Flameproof Type Safety Light Curtain Type 4

    Details

    [Note]
    The part number has been changed since December 2021.
    Please specify "UBSF4AH80V2" when ordering after December 2021.

    Product Name

    		 Flameproof Type Safety Light Curtain Type 4 BSF4-AH80 (Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Contact Us

    *Specifications and design of the products are subject to change without notice for the product improvement.

    Spec Detail

    Specifications and design of the products are subject to change without notice for the product improvement.
    ItemSpecifications
    Part NumberBSF4-AH80
    Product NumberBSF4-AH80
    Product details[Note]
    The part number has been changed since December 2021.
    Please specify "UBSF4AH80V2" when ordering after December 2021.
    Products NameFlameproof Type Safety Light Curtain Type 4
    Applicable flameproof standardsEurope: EN IEC 60079-0, EN60079-1, EN 60079-28
    USA: FM 3600 (ANSI/ISA.12.00.01, ANSI/ISA.12.22.01)
    Canada: CAN/CSA-E60079
    China: GB/T 3836.1-2021(GB/T 3836.2-2021)
    Japan: Technical standard conforming to international standards
    Flameproof capabilityEurope: Ex db [op is] ⅡB T6 Gb USA: Class I, Zone 1 AEx d ⅡB T6 Canada / Japan: Ex d ⅡB T6 China: Ex db IIB T6 Gb
    Setup locationHazardous locations such as Zone 1 or Zone 2 where "II BT6" gases or vapors may be present
    (Note) : Install the product in a location where it is less likely to suffer mechanical damage.
    Applicable standardsISO 13849-1: 2015 (Category 4, PLe), EN ISO 13849-1: 2015 (Category 4, PLe), IEC 61508-1 to 4 (SIL 3), EN 50178, EN 55011, EN 61000-6-2, EN 61496-1 (Type 4), IEC 61496-1/2 (Type 4), UL 61496-1/2 (Type 4), CAN/CSA-C22.2 No. 14
    Protective height1,595 mm 62.795 in
    Beam pitch20 mm 0.787 in
    Operating range0.3 to 6 m 0.984 to 19.686 ft
    Min. sensing objectø30 mm ø1.181 in opaque object
    Effective aperture angle± 2.5° or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / UL 61496-2)]
    Power voltage24 V DC ± 10 % Ripple P-P 10 % or less
    Current consumptionEmitter: 130 mA or less
    Receiver: 125 mA or less
    Control outputs (OSSD 1, OSSD 2)Semiconductor output (PNP output equivalent) 2 outputs
    - Maximum source current: 200 mA
    - Applied voltage: Same as supply voltage (between control output and +V)
    - Residual voltage: 3.0 V or less (at 200 mA source current)
    Control outputs (OSSD 1, OSSD 2):Operation modeON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal) / Incorporated
    Control outputs(OSSD1, OSSD2):Protection circuitIncorporated
    Response timeOFF response: 11 ms or less
    ON response: 70 ms or less
    Auxiliary output (Non-safety output)PNP open-collector transistor
    - Maximum source current: 60 mA
    - Applied voltage: Same as supply voltage (between auxiliary output and +V)
    - Residual voltage: 2.5 V or less (at 60 mA source current)
    Auxiliary output (Non-safety output):Operation modeOFF when control outputs are ON, ON when control outputs are OFF
    Auxiliary output (Non-safety output):Protection circuitIncorporated
    Indicators:EmitterTop beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the topmost beam channel receives light, lights off when the topmost beam channel is interrupted)
    Bottom beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the bottommost beam channel receives light, lights off when the bottom most beam channel is interrupted)
    Emission control indicator: Orange LED (lights up in orange during emission halt, lights off during normal operation)
    Operation indicator: 2-color (Red / Green) LED (lights up in red when control outputs are OFF, lights up in green when control outputs are ON)
    Fault indicator: Yellow LED (lights up or blinks if a fault occurs in the safety light curtain)
    Indicators:ReceiverTop beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the topmost beam channel receives light, lights off when the topmost beam channel is interrupted)
    Bottom beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the bottommost beam channel receives light, lights off when the bottom most beam channel is interrupted)
    Stable light indicator : 2-color (Green / Orange) LED (lights up in green when stable light state, lights up in orange when unstable light state, lights off when beam channels are interrupted)
    OSSD indicator: 2-color (Red / Green) LED (lights up in red when control outputs are OFF, lights up in green when control outputs are ON)
    Fault indicator: Yellow LED (lights up or blinks if a fault occurs in the safety light curtain)
    Emission halt functionIncorporated
    Test input (emission halt input)Emission: Vs-2.5 V to Vs (sink current: 5 mA or less) (Note), Emission halt: Open, or 0 to +1.5 V
    (Note) : Vs is the same value as the voltage of the used power supply to be used.
    Environmental resistance:Degree of protectionIP65 (IEC)
    Environmental resistance:Ambient temperature-10 to +40 ℃ +14 to +104 ℉ (No dew condensation or icing allowed), Storage: -20 to +55 ℃ -4 to +131 ℉
    Environmental resistance:Ambient humidity45 to 85 % RH, Storage: 45 to 85 % RH
    Ambient illuminanceIncandescent light: 5,000 lx or less at the light-receiving face
    Environmental resistance:Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and safety light curtain grounding terminal
    (Note) It shows the specifications of the built-in safety light curtain.
    Environmental resistance:Insulation resistance20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and safety light curtain grounding terminal
    (Note) It shows the specifications of the built-in safety light curtain.
    Environmental resistance:Vibration resistance10 to 55 Hz frequency, 0.35 mm 0.014 in double amplitude in X, Y and Z directions for 20 times each
    Environmental resistance:Shock resistance100 m/s2 acceleration (10 G approx.) with pulse width 16 ms in X, Y and Z directions 1,000 times each
    Altitude (Atmospheric pressure)2,000 m 6561 ft or less (800 to 1,100 hPa)
    Emitting elementInfrared LED (Peak emission wavelength: 850 nm 0.033 mil)
    MaterialFlameproof enclosure: Aluminum
    Lid: Aluminum die-cast
    Clear window: Glass
    Window frame: Steel plate (Black chromate)
    Window packing: Chloroprene
    Safety light curtain mounting bracket: Steel plate (Black chromate)
    Cable: Oil-resistant PVC
    Cable Gland: Brass (Nickel plated)
    Cable6-core (0.3 mm2 × 4-core, 0.2 mm2 × 2-core) shielded cable, 20 m 65.617 ft long
    Weight(Total of emitter and receiver)Net weight: 44 kg approx.
    AccessoriesRear sensor mounting bracket: 1 set for emitter and receiver
    Test rod: 1 pc.
    Gland adapter (Internal thread G 1/2): 2 pcs.

    MENU

    Recently checked products

    Recently checked product numbers