{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SL-VPK02｜Picking Switch for Shutter SL-VPK02 (Discontinued)

Download

Discontinued

Discontinued

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    SL-VPK02

    Product Number

    SL-VPK02

    Product

    Picking switch

    Product Name

    		 Picking Switch for Shutter SL-VPK02 (Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberSL-VPK02
    Product NumberSL-VPK02
    Products NamePicking switch
    Supply voltage24 V DC ± 10 % (Supplied from a S-LINK V control unit. A separate power supply is also available.)
    Current consumption24 V DC line: 25 mA or less (When the lamp is ON)
    Current for shutter operation: 450 mA or less
    Communication specificationComplies with S-LINK V protocol.
    Communications modeB mode, C mode
    Address settingInput address (lever switch) : 0 to 255
    Output address (lamp, shutter) : Select an offset of +32, +64, +128, or +256 from the input address.
    (Note) : Using optional remote controller.
    Lever switch (Input)Turns ON when lever switch is tilted to angle of 15° to 30° or pulled downward for a distance of about 2 mm 0.079 in or more.
    (Note) Pulling load is 19.6N or less. Make sure that stress by forcible bend or pulling is not applied directly to the lever part.
    Lamp (Output)Lamp (LED) color: Selectable from green (default), red, blue or 2-stage indication (green, blue)
    ・Turns ON when output signal from signal transmission line turns ON.
    ・Turns OFF when output signal from signal transmission line turns OFF.
    Recommended shutterMaterial: Danpla (plastic board)
    Maximum thickness: 5 mm 0.197 in
    Maximum weight: 50 g approx.
    Recommended size: W300 x H210 mm W11.811 x H8.268 in
    Ambient temperature0 to +50 ℃ +32 to +122 ℉ (No dew condensation) . Storage: -20 to +60 ℃ -4 to +140 ℉
    Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    MaterialFront cover: Polycarbonate
    Lamp cover: Polycarbonate
    Rear case: ABS
    Pipe mounting holder: Cold rolled carbon steel (SPCC)
    Driving shaft: SUM
    Arm: Cold rolled carbon steel (SPCC)
    Cable4-core cabtyre cable, 0.15 m 0.492 ft long (With a snap male connector SL-CP2)
    Net weight250g approx.

    MENU

    Recently checked products

    Recently checked product numbers